AI & AnalyticsEnergy EfficiencyPLC & ControlsTechnology

Our Free Engineering Toolbox: Six Calculators and an AI Engineer

PCA Engineering Toolbox: free calculators for controls and electrical work, plus an AI engineer

Some of the most common questions on a controls project are also the quickest to answer, if you have the right numbers in front of you. What size wire does this motor need? Will this panel overheat in the sun? Why is that transmitter reading 3.5 mA? We built the PCA Engineering Toolbox to answer questions like these in a minute, for free, on any device.

Every calculator shows its work, so you can check the math or hand it to an electrician or inspector. There is no sign-up. On a phone, you can save the toolbox to your home screen and it opens like an app, even without a signal on the plant floor.

What’s in the toolbox

  • Wire Size Calculator: starts from the load or a motor’s horsepower, applies the 125% motor and continuous-load rules, checks the 60 °C or 75 °C termination rating, corrects for hot locations and crowded conduit, and upsizes for voltage drop. Every check is listed with the result.
  • Analog Scaling Calculator: converts 4-20 mA, 0-20 mA, 0-10 V and 1-5 V signals to percent of span, engineering units and PLC raw counts in both directions, and flags loop readings that point to a broken wire or a failed transmitter.
  • Enclosure Heat Load Calculator: tells you whether a panel needs a filter fan, a heat exchanger or an air conditioner. It accounts for the enclosure’s size, material, insulation and mounting, direct sunlight and its color, and can size a heater for cold weather. Enter the heat as a quick estimate from drive horsepower, a parts list you type or import from Excel, or temperatures measured on a running panel, in watts or BTU/h.
  • VFD Energy Savings Calculator: estimates the energy a drive saves on a centrifugal fan or pump compared with a throttling valve, outlet damper or bypass, using your motor size, run hours and flow profile.
  • Three-Phase Power Calculator: converts horsepower, kW, kVA and amps for single- and three-phase circuits, with power factor and motor efficiency, and draws the power triangle.
  • NEMA and IP Enclosure Ratings: answer a few questions about the location and get a recommended NEMA type and material, plus a side-by-side chart and an IP code decoder.

An AI engineer for the questions in between

Not every question fits a calculator. Ask our AI Engineer answers general controls and electrical questions in plain language: how sinking and sourcing inputs differ, why a VFD trips on overvoltage while it decelerates, or when an industrial DMZ makes sense. Every calculator also has an “Ask our AI Engineer about this” button that carries your inputs and result into the conversation, so you can ask why it picked that wire size or what to check before you pull wire.

The AI gives general guidance, and it says so. It won’t size breakers or overloads for your specific installation, and it won’t walk anyone through bypassing a safety circuit. When a question is about your own machine or plant, it can pass you to one of our engineers.

Built to be used, not just read

A few details make the toolbox practical on a real job:

  • Shareable results. Your inputs are saved in the page link, so you can send a colleague the exact calculation you ran.
  • Email me these results. Get a clean copy of any result, or of an AI Engineer conversation, in your inbox for the job file.
  • Your units. Watts or BTU/h, °F or °C, HP or kW, copper or aluminum.
  • Your data stays yours. Parts lists and inputs stay in your browser; nothing is uploaded unless you choose to email it.

Results are general guidance. Always verify against the code edition your inspector enforces, equipment nameplates and the conditions on site.

How PCA can help

When the numbers point to a new control panel, an MCC, a drive retrofit or a cooling fix, our team designs, builds and programs it in our Modesto panel shop and supports it through startup. Request a panel quote or contact us to talk it through with an engineer.

Keep reading

Related articles

Have a panel or project in mind?

Answer a few quick questions and a PCA engineer will get back to you within one business day.