PLC, HMI & SCADA Platforms We Work With
Allen-Bradley, Siemens, Modicon, Mitsubishi, Omron, Ignition, FactoryTalk, Wonderware, WinCC and more: 35+ years of controls experience on every platform.
Our founder has spent more than 35 years in industrial controls, and in that time we have programmed, troubleshot, migrated and supported just about every PLC, HMI and SCADA platform a plant is likely to have. Most facilities run a mix of brands and generations, from a new CompactLogix next to a 1990s SLC 500 to a Siemens skid from an equipment vendor. We work with all of it, and if your system isn’t listed below, we can still figure it out.
Pacific Coast Automation is an Ignition integrator and an AutomationDirect SI Direct partner.
Ignition SCADA integration
Pacific Coast Automation is an Ignition integrator. We build Ignition SCADA and HMI systems with Perspective and Vision, historian and reporting, alarming and notification, Ignition Edge at the machine, and MQTT for plant-wide data. We also migrate older SCADA systems to Ignition. Learn more about our Ignition work.
PLCs and PACs
- Rockwell Automation / Allen-Bradley: ControlLogix, CompactLogix, GuardLogix, Micro800, MicroLogix, SLC 500, PLC-5 (Studio 5000, RSLogix 500/5, Connected Components Workbench)
- Siemens: S7-1500, S7-1200, S7-300/400, S5 and LOGO! (TIA Portal, STEP 7)
- Schneider Electric / Modicon: M580, M340, Quantum, Premium, M221 and M241 (Control Expert, EcoStruxure Machine Expert)
- Mitsubishi Electric: iQ-R, iQ-F, Q and FX series (GX Works)
- Omron: NX/NJ, CJ and CP series (Sysmac Studio, CX-Programmer)
- AutomationDirect (we are an SI Direct partner): Productivity, BRX Do-more, Click and DirectLOGIC PLCs, C-more HMIs, GS and DURApulse drives, and complete AutomationDirect-based control panels
- Emerson / GE: PACSystems RX3i, Series 90 and VersaMax (Proficy Machine Edition)
- Also: ABB AC500, Beckhoff TwinCAT, B&R, CODESYS-based controllers, WAGO, Phoenix Contact PLCnext, IDEC, Koyo, Unitronics, Horner, Opto 22 groov, Red Lion, Delta, Keyence and Bosch Rexroth
HMI, SCADA and historians
- Inductive Automation Ignition: Perspective, Vision, Ignition Edge, historian, alarming and reporting
- Rockwell FactoryTalk: FactoryTalk View SE and ME, FactoryTalk Optix, PanelView Plus and PanelView 800
- AVEVA / Wonderware: InTouch, System Platform and AVEVA Historian
- Siemens WinCC: WinCC Unified, WinCC (TIA Portal) and WinCC Classic, Comfort and Basic panels
- GE / Emerson: iFIX and CIMPLICITY
- Also: VTScada, AVEVA Citect, Red Lion Crimson, AutomationDirect C-more, Maple Systems, Weintek, Pro-face, AVEVA PI (OSIsoft) and Canary historians
Drives and motion
Allen-Bradley PowerFlex and Kinetix, Siemens SINAMICS, ABB, Yaskawa, Danfoss, Schneider Electric Altivar, Eaton, WEG, Lenze, SEW-Eurodrive and AutomationDirect GS and DURApulse drives, from simple speed control to coordinated motion and soft starters.
Networks, protocols and data
EtherNet/IP, PROFINET, PROFIBUS, Modbus TCP and RTU, DeviceNet, ControlNet, Data Highway Plus, IO-Link, OPC UA and OPC DA, MQTT and Sparkplug B, and BACnet. We design and segment plant networks with Stratix, Moxa, Hirschmann, Phoenix Contact and Red Lion hardware, and connect plant data to historians, dashboards and business systems.
Instruments and panel components
We integrate instruments and sensors from Endress+Hauser, Rosemount and Emerson, IFM, Banner, SICK, Pepperl+Fuchs and Turck, and build panels with Allen-Bradley, Siemens, Eaton, Square D, Phoenix Contact, Hoffman, Rittal and Saginaw components, or whatever your plant standard calls for.
Upgrades and migrations
Much of our work is moving plants off aging or unsupported platforms without losing what already works:
- PLC-5 and SLC 500 to ControlLogix or CompactLogix
- Siemens S5 and S7-300/400 to S7-1500
- Relay logic and obsolete controllers to modern PLCs
- Wonderware, iFIX, RSView and other legacy SCADA to Ignition or FactoryTalk
- DH+, DeviceNet and serial networks to Ethernet
How PCA can help
Whatever mix of equipment your plant runs, Pacific Coast Automation can design and build the control panels, program the PLCs, HMIs and SCADA, and support the system after startup. Tell us what you have and what you need, and an engineer will follow up. Contact us or request a control panel quote.
Have a panel or project in mind?
Answer a few quick questions and a PCA engineer will get back to you within one business day.
