Project · Wineries and distilling

Crossflow Filter Control Systems, Two Winery Plants

Stainless crossflow filter control panel with CompactLogix PLC, IO-Link masters, ABB drives and a pneumatic valve manifold, built by PCA

Industry: A large Central Valley winery, two plants (cellar filtration)

The challenge

The winery was adding OEM crossflow wine filters at two of its plants. Each skid came with its own closed controller, but the plants needed their own control of the feed and intermediate tanks, pumps, valves, cleaning and dosing around each filter. The filter and the plant also had to coordinate, so the filter pauses and resumes on tank levels and operators can see what the filter is doing.

What we did

  • For the first filter, designed and built a new control system: a main control panel with an Allen-Bradley CompactLogix 5069 and Phoenix Contact Axioline remote I/O, a drive panel with an ABB drive (Safe Torque Off wired to the safety circuit), a pneumatic valve-manifold panel and a remote pump-cart interface panel.
  • Linked our Allen-Bradley PLC to each filter’s own Modicon PLC through a gateway PC running our own SCADA platform, passing interlocks and status both ways. The plant side reads machine status, cycle and step, loop pressures, transmembrane pressure, viscosity, flows, and the filtration and washing reports, and sends back a watchdog handshake and tank-level interlocks that pause and resume the filter.
  • Used the same SCADA platform’s historian to record filter and process data, and its transaction manager to send production and cleaning data to the plant’s SQL Server.
  • Developed the design into a standard stainless panel per filter: CompactLogix 5069, IFM IO-Link masters and instruments (flow/temperature, pressure, conductivity, level, dry-run), ABB drives for the discharge pump and tank agitator, a 32-valve EtherNet/IP pneumatic manifold and a 15-inch C-more HMI.
  • Added Endress+Hauser conductivity and dissolved-oxygen analyzers, caustic dosing, IO-Link double block-and-bleed valves, nitrogen sparging and IO-Link light strips that show tank level.
  • Built a remote pump-cart interface panel for each system, linked by wireless radios.
  • Programmed the PLCs and HMIs with feed tank, intermediate tank and cleaning sequences, and provided on-site startup support at both plants.

The result

Multiple crossflow filters at two plants run on PCA panels and one common PLC program and HMI design. Each OEM filter and the plant’s tanks, pumps and cleaning are coordinated through one PLC and HMI per filter, with filter data historized and delivered to the plant’s SQL Server.

Platforms and equipment

Allen-Bradley CompactLogix 5069, C-more, Phoenix Contact Axioline, IFM IO-Link, ABB ACS380 drives, AutomationDirect NITRA pneumatics, Endress+Hauser Liquiline, Inoxpa IO-Link valves, Grundfos dosing, Banner wireless and IO-Link lighting, Schneider Modicon (OEM filter PLC), Microsoft SQL Server, our own SCADA platform (gateway, historian and transaction manager)

Related

Have a similar project?

Tell us what you are working on through the quote request form or the contact page. We design, build, program and start up control systems for plants across California.

Have a panel or project in mind?

Answer a few quick questions and a PCA engineer will get back to you within one business day.