Project · Wineries and distilling
Constant-Pressure Plant Water Pump Control Panel
Plant water pump control panel with enclosure A/C and touchscreen, built by PCA
Industry: A large California winery (plant water system)
The challenge
The winery needed a new control panel for its plant water system: two water supply pumps on variable-speed drives that hold a steady line pressure, with a local touchscreen for the setpoint, tuning and alarms, in a sealed enclosure that stays cool.
What we did
- Designed the panel and schematics, then built and point-to-point tested it in our shop: NEMA 4 enclosure, 100 A main breaker, two 20 HP ABB drives with EtherNet/IP adapters and manual motor protectors, 24 VDC supply and an Ethernet switch.
- Mounted an enclosure air conditioner on its own transformer and added a control transformer with a convenience outlet.
- Wired the main water line pressure transmitter through a 4-20 mA signal duplicator to both drives, with pressure and drive data read by a CompactLogix over EtherNet/IP.
- Programmed the CompactLogix and a 7-inch C-more for one-pump and two-pump operation under PID pressure control, with setpoint, loop tuning screen and alarms; tested in our shop with a live 4-20 mA pressure sensor.
- Added a cellular VPN router for remote access and supported startup remotely. Field installation was by the plant’s electrical contractor from our drawings.
- As an AutomationDirect SI Direct partner, we supplied and configured the AutomationDirect C-more touchscreen and StrideLinx remote access router as part of the panel.
The result
The plant water pumps run on drives under PLC pressure control from one panel and touchscreen, with one or two pumps in service, and the system can be supported remotely.
Platforms and equipment
Allen-Bradley CompactLogix, AutomationDirect C-more, ABB ACS355 drives, AutomationDirect StrideLinx, Phoenix Contact
Related
Have a similar project?
Tell us what you are working on through the quote request form or the contact page. We design, build, program and start up control systems for plants across California.
Have a panel or project in mind?
Answer a few quick questions and a PCA engineer will get back to you within one business day.
