Project · Wineries and distilling
Automated Centrifuge Discharge with IO-Link Valves

Industry: A large Central Valley winery (cellar processing)
The challenge
The winery’s separators and clarifier discharge solids-laden product that had to be routed by hand. The plant wanted those discharges, along with the discharges from its crossflow filters, sent automatically to two new tanks, without replacing the machines’ own control systems.
What we did
- Left the centrifuges’ existing SLC 500 control systems in place and documented them, writing descriptions of operation for the separators and the clarifier from their existing programs.
- Designed and built a new stainless control panel with an Allen-Bradley CompactLogix, IO-Link masters, drives for the discharge pumps and a 15-inch operator touchscreen.
- Automated the discharge header manifold with Definox IO-Link valve control heads on the existing valves (header, water drive and drain valves), so every route is confirmed by valve position feedback.
- Integrated IO-Link level transmitters and tank status lights on the two new destination tanks, so operators can see which tank is receiving and how full it is.
- Programmed the new panel to coordinate with the existing centrifuge PLCs and the crossflow filters, routing each discharge to the correct tank, and added destination-tank prompts and pump-back logic on the crossflows.
- Commissioned the system on site with plant staff.
The result
Discharges from the centrifuges and crossflows now go to the right tank automatically, with confirmed valve positions and tank levels in one place, while the existing machine controls stayed in service.
Platforms and equipment
Allen-Bradley CompactLogix 5380 and SLC 500 (existing), IFM IO-Link, Definox IO-Link control heads, ABB drives, C-more HMI
Related
Have a similar project?
Tell us what you are working on through the quote request form or the contact page. We design, build, program and start up control systems for plants across California.
Have a panel or project in mind?
Answer a few quick questions and a PCA engineer will get back to you within one business day.
